Sunday, October 23, 2011

Preparing Washed (scoured) Alpaca Locks For Spinning

In response to the big pile of alpaca from last weeks Fiber Arts Friday post, I had this request from Beth;
Spinster Beth said..."Would you mind sharing a brief description of how you prep and spin alpaca? I have three big zip bags full of alpaca, and I know how to wash it ... but it is giving me the dickens carding and spinning. Is there a secret to it?"

Well, I don't know that there is a secret, but this is how I prepare my alpaca for spinning, I hope you find it helpful!






(I've also been known to use a fine comb.)






Often times alpaca has guard hair, depending on how coarse or fine it is, you'll probably want to remove it if you can see/feel it.





At this point, I quite often just spin right from the lock, my preference is drafting from the tip end. Or I can take the locks from this stage and blend them with other fiber (more alpaca, or wool, silk, angora...) on my drum carder or hand carders. Alpaca can get a little bit fly away, so I keep an atomizer with water handy and all it takes is a fine mist to settle things back down. I have also discovered that if I let it rest on my drum carder for a couple of hours it gives the fibers time to settle into a nice cohesive batt. I also let it rest like this if if I am going to pull a roving off my drum carder, it makes a world of difference. If you don't mind mixing your fibers, just adding the smallest amount wool makes the alpaca behave so much better, it's amazing! I like to lay out a layer of alpaca, with a little "dusting" of wool and feed it onto the drum carder. Not only does it help with controlling the alpaca, it's also a very complementary spinning/knitting blend.

The following describes blending fiber using a homemade hackle. Before I decided on the Pat Green Big Bat Carder, when I was doing research on drum carders, I stumbled on a tutorial for making and using a homemade hackle. It's a great, easy to make and use, tool for fiber blending. If you are interest in more information on this tool, a search on youtube will provide you with lots of information.















Goodness, I've used more than my fair share of pictures in this post! I hope you have found something useful to take away and apply to your fiber prep techniques.

Blessings Friends!
Melissa

4 comments:

  1. Thank you for this post, I have some fibre that I need to prep, but I prefer to spin from roving so now I might be able to make myself some lovely roving sausages

    ReplyDelete
  2. Thank you! I might blend in a little wool, as you suggested. The alpaca is gorgeous, but so hard to handle! Thanks for all the pictures, and the step-by-step. It answered a lot of questions.

    ReplyDelete
  3. Great job Melissa. Very good instructions all the way through.
    I myself prefer to spin Alpaca in the raw and find it makes a fluffier softer yarn.
    I also like your letting it rest on the carder as we do on the bobbins. Makes complete sense.
    Thanks for sharing your talents.

    ReplyDelete

Popular Posts

About Me

My photo
I'm a crafter, knitter, tinkerer, who always seems to have a project or two on the launch pad. I love to share what I'm working on and I love to see what other folks are working on too, so please comment and let me know where I can see your latest creation!